How to Avoid Problems with your Air Conditioning Installation?

by admin
How to Avoid Problems with your Air Conditioning Installation?

Are you thinking about Air Conditioning Installation Adelaide? And since you are a technical person, want to do it on your own? Well, it is very much possible. You can do that. However, there are some very common mistakes people commit while installing an air-conditioner.

If you do not want to do that, then read this blog.

4 problems while installing an air conditioner in Adelaide

1. You pick the air conditioner of the wrong size

The most common error is choosing an air conditioner of inappropriate size. The consequences of it are big, ranging from dysfunction of AC or inefficient energy use.

If the size is bigger than your need, then it will result in short cycling. If the size is smaller, then it will be overburdened always.

Both cases will lead to more wear and tear. You will need to call air conditioning repairs Adelaide very frequently.

In short, you need to get the size right

2. Not having a proper water drainage system

A lot of moisture gets generated when an air conditioner works. If it is not filtered away properly, then it can damage the house. There can be backed-up pipes, growth of mold and mildew, foul smell, and deteriorated drywall.

You will be surprised to know that implementing a poor drainage system is among the most common mistakes in air-conditioner installation.

If it is done by air conditioning Adelaide experts, then the possibility of incorrect air conditioning installation or improper drainage system is less.

3. Incorrect installation of the thermostat

The thermostat is the most important component of an air conditioner. It controls the temperature and regulates the working of the compressor. But still, improper installation of the thermostat is a common air. As a result, the AC ends up working harder than it would otherwise.

The thermostat should be installed away from air vents. It should be at a location where it gets the least direct sunlight.

The more rightly it is placed, the more accurately it will work. And it will result in the precise working of the system. Otherwise, you will have to frequently call air conditioning repairs Adelaide.

4. Improper sealing of ducts

If the ducts are not sealed well, then the efficiency of the air conditioner will be compromised heavily. The air will seep out of the cracks in the ducts.

Ideally, there should not be any cracks in the ductwork. Seal every minor and major crack using a permanent sealer.

You should take care of these common errors while installing an air conditioner in your house.

Also Read:

How Routine Maintenance Can Save Your Money on Air Conditioning Repairs?

How to Clean Your Air Conditioner Filter?

You may also like